Service manual

Appendix D 177
Error Messages
Error Messages on PC Monitor Display
1. Chapter Title
2. Chapter Title 3. Chapter Title
D. Error Messages
5. Chapter Title
hpe5022_ERROR_INV_SEQ Sequence is invalid. Check
your program.
hpe5022_ERROR_INV_SEQ_HNDL Detected the invalid
sequence handle parameter
in UDS. Check your
program.
hpe5022_ERROR_INV_SETUP Detected an error in
operation. There must be
some illegal set-up in the
parameters. Check your
program.
hpe5022_ERROR_INV_TRIG_PORT Invalid trigger port is
selected as the parameter
‘trigPort’.
hpe5022_ERROR_MEM_ALLOC Can't allocate enough
memory. Reboot your PC.
hpe5022_ERROR_MEMORY Check sum error occurred
in the calibration data or
user data.
hpe5022_ERROR_MICRO_TRACK_FAILED Failed to create a micro
track. The measured TAA
level did not reach the
specified level. Check the
parameters for micro track
measurement.
hpe5022_ERROR_MOTOR_FAULT An error is detected in the
motor or servo of the
spinstand. Check the
spinstand and restart the
system.
hpe5022_ERROR_NO_OPTION An option is not installed to
perform the required
measurement and function.
hpe5022_ERROR_NOT_INIT System is not initialized.
Check if the required
modules and options are
installed.
hpe5022_ERROR_NDEF_HGA The cassette parameters and
type are undefined. Specify
the cassette parameter.
Error Messages on PC Monitor Display
Error Code Description