Service manual

166 Appendix C
Software Tools
Spinstand Tool Usage
Spinstand Diagnosis menu
To activate Spinstand Diagnosis menu, click on
Diagnostic tab of the spinstand tool.
This menu controls each part of the spinstand to diagnosis the spinstand. Status window
shows each part status and data.
Figure C-3 Spinstand Diagnosis menu
Reset Reset the spinstand.
Axis Select Select an Axis from Spindle Stage, HLM Stage, Spindle Motor or All
Motors.
Stage Lock Lockdown the selected stage.
Stage Unlock Unlock the selected stage.
Homing Initialize the selected stage position and fix home position of each
stage.
Servo Off Off the servo control of each stage.
Load
UnLoad
Load or unload the head to actuate the HLM.
Clamp
UnClamp
Fix or release the media on the spindle.
Spindle Start
Spindle Stop
Start or stop the spindle rotation. Before rotation, the media will be
clamped automatically.