Service manual

138 Chapter 5
Software Recovery
Installing Agilent I/O Library
10. Click Finish to finish the installation.
Configuring I/O Library
1. Connect the E8491B with the IEEE-1394 card in the PC slot.
2. Turn on the PC and the VXI mainframe.
3. Execute the I/O Config by clicking the right mouse button on the IO logo in the
windows task bar (right bottom in the PC screen) and selecting
Run IO Config.
4. Click
Auto Add.
5. Confirm if the COM1, hpib7 and VXI is displayed as the SICL Name in the Configured
Interfaces box.