Service manual

Chapter 4 127

Assembly Replacement and Post-Repair Procedures

Cable Connection

1. Chapter Title

2. Chapter Title 3. Chapter Title

4. Assembly Replacement

5. Chapter Title

and Post-Repair Procedures

NOTE Store the terminators you removed from the Agilent E5035B to mount the oscilloscope in a

safe place for future use.

Connecting the GPIB

Step 1. Connect a GP-IB extender adapter to the GPIB connector of the PC.

Step 2. Connect the PC and the oscilloscope with a GPIB cable.

23 SMA(f)-BNC(m) Adapter - - 1250-1700

27 GPIB Cable, 2m GPIB Port on PCI Board 54845A/B GPIB Port 10833B

GPIB Adapter Extender

- - 10834A

*1.The GPIB Extender is used if the GPIB connector is difficult to connect to the PC when the PC’s rear panel is

sunk.

Table 4-13 Cable Connection (Option 103)

No. Description Connection Part Number