Service manual

Chapter 4 121
Assembly Replacement and Post-Repair Procedures
Cable Connection
1. Chapter Title
2. Chapter Title 3. Chapter Title
4. Assembly Replacement
5. Chapter Title
and Post-Repair Procedures
Connecting the E5041A Dual Counter Module (Optional)
NOTE This procedure is needed only if the system is configured with the Agilent E5041A Dual
Counter Module.
Figure 4-16 Cable Connection of the Agilent E5041A (Option)
Table 4-10 Cable Connection (E5041A)
No. Description Connection Part Number
16 BNC(m)-BNC(m) Cable E5037C/D “Gate Out” E5041A “Trig In” E5041-61602
17 SMA(m)-SMA(m) Cable E5036A “Filtrd Out 5” E5041A “Signal In 50 Ω” E5041-61603