Service manual

32 Rack Mounting and Option Installation Chapter 2
5. Remove the chassis section from the intermediate section (Figure
2-8). (The chassis section will be connected to the mainframe in Step
7.) Slide the intermediate section back into the stationary section.
6. Attach the stationary section to the rack’s front inside rail through the
channel nuts. Use two m5x12 flat head screws. Attach the stationary
section to the rear inside rail using two m5x12 pan-head screws
(Figure 2-9).
Figure 2-8. Removing the Rack Slide Chassis Section from the Intermediate Section.
Depress From Back
Side To Remove
Rack FrontRack Rear
Stationary Section Stationary Section Chassis Section
(Right Rack Slide Shown)
Figure 2-9. Installing the Rack Slide Stationary Sections.
Mounting Holes When Using
the VXI Plug&Play Compliant Adapters
(Left Rack Slide Shown)
m5x12 Pan Head Screws
(Standard Adapter Kit)
m5x12 flat head screws
(Standard Adapter Kit)
Rack Front Rack Rear