Service manual

Rack Mounting and Option Installation 31Chapter 2
4. From the bottom channel nut inserted in Step 3, count up four holes.
Slide a channel nut over the corresponding hole on the inside vertical
rail (Figure 2-7). Install a second channel nut on the inside rail four
holes above the first nut. Repeat for the other rail. Install channel nuts
on the corresponding holes on the rear inside rails.
Figure 2-7. Positioning the Rack Slides (using Option 923 - standard adapters).
Left Vertical Rail
(Front)
(Front)
Right Vertical Rail
Channel Nuts On
Center Holes
Channel Nuts On
Center Holes
Four
Holes
Channel Nuts
For Rack
Slides