Service manual

Agilent E8401A, E8403A Product Specifications 59Appendix A
Diagnostic Connector • Output all 7 backplane voltages for monitoring
• Output +5V and +12V for remote applications. 1A max each.
• Input +5VSTDBY to backplane. 1A max total for pins 5 and 18 wired
in parallel.
• Remotely operate On/Standby
• Power supply temperature output. 0mV = 0C, 10mV per C.
• Reference temperature output. 0mV = 0C, 10mV per C.
• Fans OK output, same as Fans indicator. TTL low true logic levels.
• Backplane voltages OK output. TTL low true logic levels.
• SYSRESET*, input or output. TTL low true logic levels.
• ACFAIL*, output. TTL low true logic levels.
• Ground
Environmental Specifications
Temperature Operating Temperature Range:0C to +55C
Storage Temperature Range:-40C to +75C
Humidity
Operating Humidity Range:Up to 95% RH from 0C to +40C.
Up to 65% RH from +40C to +55C.
Storage Humidity Range: Up to 95% RH from 0C to +55C.
Up to 65% RH from +55C to +75.
Shock
End Use Handling:Half sine waveform, <3 msec Duration,
v = 160 cm/sec minimum
Transportation:Trapezoidal waveform, v = 605 cm/sec,
30 g minimum
Vibration
Operating and Functional:5 to 500 Hz, 0.0001 g
2
/Hz Spectral Density
Survival, Swept Sine:5 to 500 Hz Resonance Search, 5 minute Dwell on
Resonances at 0.5 g
Survival, Random:0.015 g
2
/Hz Spectral Density
Altitude:Up to 3000m
Pollution Degree 2
Safety Specifications Conforms to EN61010-1 including Amendment 2 (IEC 1010-1 including
Amendment 2)
Certified to CSA 1010.1
NRTL Listing to UL 3111-1
Conforms to EN60950 (IEC 950)
Certified to CSA 950.
NRTL Listing to UL 1950 Compliance.