Service manual

Rack Mounting and Option Installation 21Chapter 2
Chapter 2
Rack Mounting and Option Installation
Chapter Overview
This chapter contains procedures for rack mounting the mainframe and for
installing the hardware options available with the mainframe. The sections
in this chapter include:
• Rack Mounting the Agilent E840xA Mainframe . . . . . . . . . 21
• Installing the Cable Tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
• Installing the Tinted Acrylic Door . . . . . . . . . . . . . . . . . . . . 35
• Installing the Intermodule Chassis Shields . . . . . . . . . . . . . . 37
• Installing the Backplane Connector Shields . . . . . . . . . . . . . 39
• Agilent E840xA Air Filter Kit . . . . . . . . . . . . . . . . . . . . . . . 41
Rack Mounting the Agilent E840xA Mainframe
The Agilent E840xA is mounted into standard EIA cabinets using the rack
mount adapter options and support rail or rack slide kit shown in Table 2-1.
When rack mounting the mainframe, you must order an adapter option and
the rail or rack slide kit supported by the adapter.
Table 2-1. Agilent E840xA Rack Mount Options and Kits
Rack Mount Adapter Options Rail and Rack Slide Kits
Agilent E840xA Standard Adapter Kit
Option 923 (kit p/n E8400-80923)
Support Rail Kit Agilent E3664A
or
Rack Slide Kit Agilent p/n 1494-0411
Agilent E840xA Flush Mount Adapter Kit
Option 924 (kit p/n E8400-80924)
Support Rail Kit Agilent E3664A
Agilent E840xA VXIplug&play Compliant
Adapter Kit
Option 925 (kit p/n E8400-80925)
Support Rail Kit Agilent E3663A*
or
Rack Slide Kit Agilent p/n 1494-0411
* This adapter kit can also be used with the Agilent E3665A rail kit.