Specifications

37
General Accessories
USB
□ N4688A CD-ROM drive
Provides an external read/write CD-ROM drive with a USB cable.
□ N4689A USB hub
Provides a USB hub for connecting additional USB peripherals.
Hard drive
1
□ N8981A spare hard drive with mounting cradle
For E836xA/B and N5230A.
□ N8982A spare hard drive with mounting cradle
For E836xC and N5230C.
□ N5242-60035 spare hard drive
For N5242A with 1.6 GHz Pentium M CPU.
□ N5242-60037 spare CPU board with hard drive
For N5242A with 1.6 GHz Pentium M CPU.
□ N5242-60044 spare hard drive with mounting cradle
For N524xA with 2.0 GHz Core 2 Duo CPU.
Probe
□ 85024A high-frequency probe
Provides high-impedance in-circuit test capability from
300 kHz to 3 GHz.
Power meters and sensors
2
Recommended for self support, adjustments and performance
tests to verify proper instrument operation.
□ U2000A USB power sensor, 10 MHz to 18 GHz
□ U2001A USB power sensor, 10 MHz to 6 GHz
□ U2002A USB power sensor, 50 MHz to 24 GHz
□ U2004A USB power sensor, 9 kHz to 6 GHz
□ E4418B single-channel power meter
□ E4419B dual-channel power meter
□ 8481B power sensor, 10 MHz to 18 GHz, Type-N (m), 25 W
□ 8481A power sensor, 10 MHz to 18 GHz, Type-N (m), 100 mW
□ 8485A power sensor, 50 MHz to 26.5 GHz, APC-3.5 mm (m),
100 mW
□ 8487A power sensor, 50 MHz to 50 GHz, 2.4 mm, 300 mW
□ 8487D power sensor, 50 MHz to 50 GHz, 2.4 mm, 100 mW
□ R8486A power sensor, 26 GHz to 40 GHz, waveguide flange
UG-599/U, 100 mW
□ Q8486A power sensor, 33 GHz to 50 GHz, waveguide flange
UG-383/U, 100 mW
□ U8486A power sensor, 50 GHz to 75 GHz, waveguide flange
UG-385/U, 200 mW avg
□ E4412A CW power sensor, 10 MHz to 18 GHz, Type-N (m), 200 mW
□ E4413A CW power sensor, 50 MHz to 26.5 GHz, 3.5 mm, 200 mW
1. For more information on hard drive, refer to na.tm.agilent.com/pna/
hdnumbers.html
2. For the latest guide to power meters and power sensors, refer to the
Agilent web site: www.agilent.com/find/powermeters
3. Front handles and Option 1CP (rack mount with handles) are not
available for the N5242A.
Amplifiers
□ 83006A power amplifier, 10 MHz to 26.5 GHz, 20 dB gain,
power out: +18 dBm to 10 GHz or +16 dBm to 20 GHz or
+14 dBm to 26.5 GHz
□ 83017A power amplifier, 50 MHz to 26.5 GHz, 25 dB gain,
power out: +20 dBm to 20 GHz, or +15 dBm to 26.5 GHz
□ 83018A power amplifier, 2 to 26.5 GHz, 27 dB gain to 20 GHz
or 23 dB to 26.5 GHz, power out: +24 dBm to 20 GHz or
+21 dBm to 26.5 GHz
□ 83020A power amplifier, 2 to 26.5 GHz, 30 dB gain to 20 GHz
or 27 dB to 26.5 GHz, power out: +30 dBm to 20 GHz or
+26 dBm to 26.5 GHz
□ 83050A power amplifier, 2 to 50 GHz, 23 dB gain, power out:
+20 dBm to 40 GHz or +17 dBm to 50 GHz
□ 83051A power amplifier, 45 MHz to 50 GHz, 23 dB gain power out:
+12 dBm to 45 GHz or +10 dBm to 50 GHz
Couplers
□ 87300B coaxial coupler, 1 to 20 GHz, SMA (f), 10 dB coupling
□ 87300C coaxial coupler, 1 to 26.5 GHz, 3.5 mm (f), 10 dB coupling
□ 87301B coaxial coupler, 10 to 46 GHz, 2.92 mm (f), 10 dB coupling
□ 87301D coaxial coupler, 1 to 40 GHz, 2.4 mm (f) or optional
2.92 mm (f), 13 dB coupling
□ 87301E coaxial coupler, 2 to 50 GHz, 2.4 mm (f), 10 dB coupling
□ 87310B 90
o
coaxial coupler, 1 to 18 GHz, SMA (f), 3 dB coupling
Equipment rack accessories
□ E3663AC Rail kit
□ 5063-9217 Rack mount kit, for use without handles
(included with Option 1CM)
□ 5063-9205 Front handle kit
3
□ 5063-9224 Rack mount kit with handles
3
□ 5063-9237 Rack mount kit, for use with standard supplied
handles (included with Option 1CP)
3
Monitors
VGA-compatible monitor
Printers
USB, LAN, parallel or serial printers with Microsoft® Windows®
printer driver
Interface cables
Choose the appropriate cables to connect each
peripheral to the network analyzer.
□ 10833A GPIB cable, 1.0 m (3.3 ft)
□ 10833B GPIB cable, 2.0 m (6.6 ft)
□ 10833D GPIB cable, 0.5 m (1.6 ft)
□ 82357B GPIB to USB interface