Specifications

32
Cables
Note: Agilent offers the following 2.4 mm test port cables. Adapters will
be necessary when using these cables for 2.92 mm measurements.
□ 85133C
1
single, semi-rigid: 2.4 mm (f) to PSC-2.4 mm (f),
81 cm, 32 inches
□ 85133D
1
set, semi-rigid:
One 2.4 mm (f) to 2.4 mm (m), 53 cm, 21 inches,
p/n 85133-60001
One 2.4 mm (f) to 2.4 mm (f), 53 cm, 21 inches,
p/n 85133-60002
□ 85133E
1
single, flexible: 2.4 mm (f) to PSC-2.4 mm (f),
97 cm, 38 inches
□ 85133F
1
set, flexible:
One 2.4 mm (f) to 2.4 mm (f), 63 cm, 25 inches,
p/n 85133-60016
One 2.4 mm (f) to 2.4 mm (m), 63 cm, 25 inches,
p/n 85133-60017
□ 85133G
1
Single, semi-rigid: 2.4 mm (f) to 2.4 mm (m),
53 cm, 21 inches
□ 85133H
1
Single, flexible: 2.4 mm (f) to 2.4 mm (m),
63 cm, 25 inches
□ N4421A-B20 Set of 4, flexible: 2.4 mm (f) to 2.4 mm (m),
91.4 cm, 36 inches
Adapters
□ 11904A 2.4 mm (m) to 2.92 mm (m)
□ 11904B 2.4 mm (f) to 2.92 mm (f)
□ 11904C 2.4 mm (m) to 2.92 mm (f)
□ 11904D 2.4 mm (f) to 2.92 mm (m)
□ 11904S 2.4 mm to 2.92 mm
Adapter set, contains 4 matched adapters
1. Special rugged female connector specifically for connecting
to the network analyzer test port, but does not mate with a
standard male connector.