Specifications
31
Adapter set
□ 85130F 2.4 mm
1
to 3.5 mm
□ 85130F 2.5 mm
1
to 3.5 mm
□ 85130G 2.4 mm
1
to 2.4 mm
For devices with K connectors (2.92 mm)
Mechanical calibration kits
□ 85056KE01 DC to 40 GHz
For use with user supplied 2.9 mm test port cables. 2.92 mm
(K connector) calibration kit with fixed and sliding loads. The
Agilent 85056KE01 calibration kit is an ordering convenience
to allow the pass through ordering from Agilent Technologies,
Inc. for the Maury 8770C47 calibration kit.
□ 85056KE02 DC to 40 GHz
For use with user supplied 2.92 mm test ports cables. 2.92 mm
(K connector) calibration kit with fixed loads only. The Agilent
85056KE02 calibration kit is an ordering convenience to allow
the pass through ordering from Agilent Technologies, Inc. for
the Maury 8770D47 calibration kit.
The 85056KE01 and 85056KE02 contains one NMD 2.4 mm
2
(f)
to 2.92 mm (f) and one NMD 2.4 mm
2
(f) to 2.92 mm (m) test
port adapter to adapt the 2.4 mm test ports of the PNA to 2.92
mm. It also supplies 2.92 mm to 2.92 mm in-series adapters (3
adapters) and a PNA Cal Coefficients on a USB stick. Users
must supply their own 2.92 mm or K-connector test port
cables. Also included is a 2.92 mm torque wrench.
Maury Microwave Terms and Conditions for Warranty and
Return apply. Maury Microwave Corp. calibration kits are to be
returned directly to Maury Microwave for service, repair, or
calibration issues and not to Agilent Technologies. For addi-
tional information go to www.maurymicrowave.com.
Agilent Technologies does not guarantee the performance of
the Maury calibration kits or the system performance when
connected to Agilent Microwave PNA Series network analyz-
ers.
Electronic calibration kits
□ N4692A Microwave ECal: 10 MHz to 40 GHz, 2-ports.
Includes:
Option M0F module with:
N4692-60001 2.92 mm (f) to 2.92 mm (m) ECal module
Option 00M module with:
N4692-60002 2.92 mm (m) to 2.92 mm (m) ECal module
Option 00F module with:
N4692-60003 2.92 mm (f) to 2.92 mm (f) ECal module
Option 00A adds:
N4692-60021 2.92 mm (m) to 2.92 mm (m) adapter
N4692-60022 2.92 mm (f) to 2.92 mm (f) adapter
For devices with 2.4 mm connectors
Mechanical calibration kits
□ 85056A standard: DC to 50 GHz.
Includes:
00901-60003 2.4 mm (m) fixed broadband load
00902-60004 2.4 mm (f) fixed broadband load
00915-60003 2.4 mm (m) sliding load
00915-60004 2.4 mm (f) sliding load
85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
85056-60006 2.4 mm (f) to 2.4 mm (f) adapter
85056-60007 2.4 mm (m) to 2.4 mm (f) adapter
85056-60020 2.4 mm (m) short
85056-60021 2.4 mm (f) short
85056-60022 2.4 mm (m) open
85056-60023 2.4 mm (f) open
□ 85056D economy: DC to 50 GHz.
Includes:
00901-60003 2.4 mm (m) fixed broadband load
00902-60004 2.4 mm (f) fixed broadband load
85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
85056-60006 2.4 mm (f) to 2.4 mm (f) adapter
85056-60007 2.4 mm (m) to 2.4 mm (f) adapter
85056-60020 2.4 mm (m) short
85056-60021 2.4 mm (f) short
85056-60022 2.4 mm (m) open
85056-60023 2.4 mm (f) open
Electronic calibration kits
□ N4693A Microwave ECal: 10 MHz to 50 GHz, 2-ports.
Includes:
Option M0F module with:
N4693-60001 2.4 mm (f) to 2.4 mm (m) ECal module
Option 00M module with:
N4693-60002 2.4 mm (m) to 2.4 mm (m) ECal module
Option 00F module with:
N4693-60003 2.4 mm (f) to 2.4 mm (f) ECal module
Option 00A adds:
85056-60005 2.4 mm (m) to 2.4 mm (m) adapter
85056-60007 2.4 mm (f) to 2.4 mm (f) adapter
Cables
Note: Agilent offers the following 2.4 mm test port cables. Adapters will
be necessary when using these cables for 2.92 mm measurements.
□ 85133C
1
single, semi-rigid: 2.4 mm (f) to PSC-2.4 mm (f),
81 cm, 32 inches
□ 85133D
1
set, semi-rigid:
One 2.4 mm (f) to 2.4 mm (m), 53 cm, 21 inches,
p/n 85133-60001
One 2.4 mm (f) to 2.4 mm (f), 53 cm, 21 inches,
p/n 85133-60002
□ 85133E
1
single, flexible: 2.4 mm (f) to PSC-2.4 mm (f),
97 cm, 38 inches
□ 85133F
1
set, flexible:
One 2.4 mm (f) to 2.4 mm (f), 63 cm, 25 inches,
p/n 85133-60016
One 2.4 mm (f) to 2.4 mm (m), 63 cm, 25 inches,
p/n 85133-60017
□ 85133G
1
Single, semi-rigid: 2.4 mm (f) to 2.4 mm (m),
53 cm, 21 inches
□ 85133H
1
Single, flexible: 2.4 mm (f) to 2.4 mm (m),
63 cm, 25 inches
□ N4421A-B20 Set of 4, flexible: 2.4 mm (f) to 2.4 mm (m),
91.4 cm, 36 inches
1. Special rugged female connector specifically for connecting
to the network analyzer test port, but does not mate with a
standard male connector.
2. Special rugged female connector specifically for connecting
to the network analyzers NMD 2.4 mm test port, but does
not mate with standard 2.4 mm male connector