Specifications

Measurement applications

□ Time domain (Option 010)

This option enables the PNA Series to view reflection and trans-

mission responses in both time or distance domain. Use time

domain to tune filters, gate out the response of fixtures and

cables, characterize the impedance of transmission line, and more.

□ Frequency offset (Option 080)

This option enables the PNA Series to set the source frequency

independently from where the receivers are tuned. This ability

is important for two general classes of devices: mixers (and

converters) and amplifiers.

□ Scalar-calibrated converter measurements (Option 082)

With a simple setup and calibration, this application provides the

highest accuracy for conversion-loss (or gain) measurements by

combining one-port and power-meter calibrations to remove

mismatch errors. Option 080 required.

□ 4-port measurement application (Option 550)

Adds multiport analyzer mode to any 2-port PNA-L network

analyzer with configurable test set (Option xx5 or xx6), which

enables full 4-port error correction and measurement capabilities

using an external test set. Only standard measurement class is

available in the multiport analyzer mode.

□ N-port capabilities (Option 551)

Adds multiport analyzer mode to any PNA-L network analyzer

with configurable test set (Options xx5 or xx6), which enables

full N-port error correction and measurement capabilities using

an external test set. Only standard measurement class is avail-

able in the multiport analyzer mode.

PNA-L Series Network Analyzer