Specifications

23
FieldFox
N9912A N9923A
ENA-L ENA LF ENA PNA-L PNA PNA-X PNA/PNA-X
millimeter
wave
Basic measurements
Gain, return loss, isolation
● ● ● ● ● ● ● ● ●
Compression, AM-PM conversion
● ● ● ● ● ● ●
Automated gain compression
●
High power measurements
High output power
1
●
Source attenuator
●
5
●
5
● ● ● ● ● ●
Receiver attenuator
● ● ●
Connection loop before reference path
●
Configurable test set
●
2
● ● ● ●
3
Harmonic measurements
Frequency-offset mode
● ● ● ● ● ●
Analyzer source harmonics
4
●
Receiver attenuator
● ● ●
Intermodulation distortion measurements
Frequency-offset mode
● ● ● ● ●
Second internal source
● ●
Internal combining network
●
Simplified swept-IMD setup
●
Noise figure
●
Hot-S22
● ●
DC inputs for power added efficiency
● ● ●
Internal DC bias source
●
Internal bias-tee
● ● ● ●
Nonlinear vector network analyzer applications
X-parameters
●
nonlinear component characterization
●
nonlinear pulse envelop domain
●
multi-tone component characterization
●
two-tone X-parameters
●
three port devices; mixers, etc.
●
Measurement Solutions for Your Application
Amplifier measurements
1. High output power is defined as greater than +13 dBm for leveled power output.
2. Requires Option 44x, 48x or 4K5 to use external test set mode.
3. Available up to 67 GHz.
4. 2nd and 3rd harmonics of the internal source are significantly lower than 20 to 30 dBc.
5. High and low setting only.