Specifications

15
Manufacturing test
FieldFox
N9912A N9923A
ENA L ENA LF ENA PNA-L PNA-X PNA MW PNA/PNA-X
millimeter
wave
Programming
Internal programming capability
1
● ● ● ● ● ● ●
Fast data transfer
2
● ● ● ● ● ●
Calibration
Adapter-removal calibration
3
● ● ● ● ● ● ●
SOLR (Unknown thru) using
mechanical calibration or ECal
● ● ● ● ● ●
ECal support
● ●
4
● ● ● ● ●
5
Measurement and analysis
Segment sweep
6
● ● ● ● ● ● ●
Pass/fail testing
● ● ● ● ● ● ● ● ●
Embedding and de-embedding
7
● ● ● ● ●
Waveform analysis command
8
● ● ●
Interface
LAN
● ● ● ● ● ● ● ● ●
I/O port
● ● ● ● ● ● ●
Parts handler interface
9
● ● ● ● ● ● ●
VGA output
● ● ● ● ● ● ●
1. Includes integrated programming language such as Visual Basic for Applications, and ability of open Windows environments to install programming languages into analyzers.
2. COM/DCOM provides faster data transfer than GPIB.
3. The calibration technique used for non-insertable devices such as those with the same connectors on input and output ports.
4. Usable at the frequency range of >300 kHz (2-port ECal modules) or >9 kHz (N4431B 4-port ECal module). ECal user characterization function is not usable for the 4-port
ECal module with the ENA LF and other 2-port ENA Series network analyzers.
5. Functions up to 67 GHz.
6. Segment sweep includes sweep types that are known as list and fast-swept list.
7. Functions to embed or de-embed a fixture's characteristics.
8. Programming commands to quickly retrieve parameters of filters and resonators.
9. The parts handler interface is an I/O-port specialized for communication with an automatic parts handler system.
Measurement Solutions for Your Application
Manufacturing test