Specifications

5.1.6.2 Application Code

Agilent VEE version 6.0 or higher must be installed to

run the application in this example. There is a runtime

version of Agilent VEE that may be used if the applica-

tion has been saved as

“

runtime”. A free version of

Agilent VEE can be found on the following web site:

http://www.agilent.com/find/vee/. The application may be

run on a PC or on the PNA Series analyzer.

5.1.6.3 Application Output

The figure below shows the displayed results when the

application is executed.

5.1.7 National Instruments

™

LabVIEW

Example

5.1.7.1 Application Configuration

Use National Instruments

™

Lab VIEW version 5.0 or

above for this example. See the National Instruments

™

LabVIEW documentation for information on using

ActiveX objects in the LabVIEW development environ-

ment.

5.1.7.2 Application Code

National Instruments

™

LabVIEW 5.0 or higher must be

installed to run the application. The application can be

run on a PC or on the PNA Series analyzer.

5.1.7.3 Application Output

The figure below shows the displayed results when the

application is executed.