User manual

lpErrorDoc.txt
to respond within the appropriate amount of time. If cycling power
does not correct the problem, report this error to Agilent
Technologies.
606 DSP times out; Opt 300 EDGE BERT capability({value}).
The digital signal processor (DSP) on the bit error rate tester
board failed to respond while Option 300 is operating. Report this
error to Agilent Technologies.
606 DSP times out; Opt 300 GSM BERT capability({value}).
The digital signal processor (DSP) on the bit error rate tester
board failed to respond while Option 300 is operating. Report this
error to Agilent Technologies.
606 DSP times out; Option UN7 capability({value}).
The digital signal processor (DSP) on the bit error rate tester
board failed to respond while Option UN7 is operating. Report this
error to Agilent Technologies.
606 DSP times out; {name}
The digital signal processor (DSP) failed to respond within the
appropriate amount of time while accessing the specified file.
Report this error to Agilent Technologies.
607 DSP returns error.
The digital signal processor (DSP) is in an indeterminate state.
Report this error to Agilent Technologies.
607 DSP returns error.; Opt 300 EDGE BERT capability({value}).
Option 300 DSP for EDGE BERT capability returns an error.
607 DSP returns error.; Opt 300 GSM BERT capability({value}).
The digital signal processor (DSP) on the bit error rate tester
board failed to respond while Option 300 is operating. Report this
error to Agilent Technologies.
607 DSP returns error.; Option UN7 capability({value}).
The digital signal processor (DSP) on the bit error rate tester
board failed to respond while Option UN7 is operating. Report this
error to Agilent Technologies.
617 Configuration Error; Analog modulations subsystem not created.
The hardware control creation process failed due to a configuration
file conflict or a hardware configuration error. Report this error
to Agilent Technologies.
617 Configuration Error; Bad board header in fixed board: {name}
During the system configuration scan of the CPU and motherboards, a
board with a bad configuration header was detected. Report this
error to Agilent Technologies.
617 Configuration Error; Bad board header in parallel slot: {value}
Page 55