User manual
lpErrorDoc.txt
GAP2 is a single frame method gap that is greater than 7 slots
long. DTX slots per frame should be less than 8.
-221 Settings conflict; Nfirst2 >= 8 or Nlast2 <= 6
GAP2 is a double frame method gap; the DTX slots per frame is > 7.
DTX slots per frame should be less than 8.
-221 Settings conflict; Number of E-DPDCH is too many.
E-DPDCH channel conflicts with other channel.
Reduce the number of E-DPDCH channel or turn off the conflicting
channel.
-221 Settings conflict; The number of Preambles exceeds that allowed at the
current Max Power setting. The number of Preambles has been set to
{value}.
The number of preamble steps cannot be greater than what is allowed
by the difference between the initial and max power settings. The
following equation is used to calculate the max number of preamble
steps: # of preamble steps = ((maxPower-initPower)/rampStepSize)+1
-221 Settings conflict; Number of time slots cannot be 3.
Number of time slots in a 1xEV-DV channel can be 1, 2 or 4.
-221 Settings conflict; Only and first DPCH must be on (DPCH1) when
activating Compressed Mode.
Currently, only Single and first DPCH are supported in Downlink
compressed mode.
-221 Settings conflict; Only ONE user file can be selected for all traffic
channels. {name} is now using: {name} file.
All traffic channels (F-FCH, F-SCH) can use a user file as a data
source, but they must all use the same user file. The <CHANNEL
NAME> data has been changed to <FILE NAME> file.
-221 Settings conflict; Only PN9 and PN15 can be selected when slot format
is 16.
Only PN9 and PN15 can be selected when slot format is 16.
-221 Settings conflict; Only ramp sweeps can alternate.
Only ramp sweeps can alternate; list, step sweeps, and CW states
cannot.
-221 Settings conflict; Option 403 is required to be able to turn Noise on.
Option 403 (AWGN) is required to enable the AWGN portion of option
401 (Real-Time cdma2000) or option 414 (Real-Time 1xEV-DV).
-221 Settings conflict; OutOfSyncTest should be off when any antenna is
selected as Transmit Diversity or Compressed Mode is on.
Compressed Mode should be off when any antenna is selected as
Transmit Diversity or OutOfSyncTest is on.
-221 Settings conflict; Pattern repeat is changed to continuous because
Page 32










