User manual

lpErrorDoc.txt
File system volumes were verified.
Informational warning. Powering down system (turning the power off)
during file system write operation may leave the file system in
inconsistent state. On subsequent reboot the volume was verified
and errors repaired.
-310 System error; Transmit pace not supported
Command is not supported for RS232 communication.
-310 System error; Unknown file system error. {name}
Internal error.
-310 System error; Volume already exists: {name}
Internal error. The attempt to mount volume detected that volume
already exists. The system will proceed anyway.
-310 System error; Volume consistency check failed: {name} Volume needs to
be reformatted.
Consistency check detected that volume is corrupted and cannot be
automatically fixed. Contact service for help.
-310 System error; Volume failed to mount after reformatting: {name}
The volume was reformatted successfully but failed to mount. The
storage media could be damaged.
-310 System error; Volume failed to mount. It was reformatted: {name} -
{name}.
The volume was reformatted because is failed to mount. It was
either completely damaged or never initialized. This error reports
the 'Success' or 'Failure' of formatting operation. The system will
try to proceed either way.
-310 System error; Volume format failed: {name}
The formatting of the file system volume failed. The instrument
hardware may be damaged.
-310 System error; Volume reformatted: {name}
Informational error that a file system volume was reformatted
because it was damaged or formatting was requested by user.
-310 System error; Volume verification found error. Volume: {name} Error
will be fixed now. Fault code={code}
Volume verification encountered a volume error that was fixable.
The error was fixed and verification continued.
-310 System error; Volume verification found error. Volume: {name} This
error cannot be fixed. Please reformat the volume. Fault code={code}
Volume verification encountered a volume error that was not
fixable. The verification continued. The volume should be
reformatted to regain stable functionality.
-310 System error; YO pretune service calibration failed.
Page 9