User manual

lpErrorDoc.txt
The command issued expected a given personality to be loaded on the
given board. Report this error to Agilent Technologies.
-310 System error; Invalid object. {name}
Internal error. File system operation encountered invalid object.
-310 System error; Line:{value} file: {name} stack: {name}
An internal error occurred at the specified location within the
specified file.
-310 System error; Media raw. {name}
The flash storage media was never formatted or is corrupted. The
system will reformat it now.
-310 System error; Memory already allocated. {name}
Internal error. File system operation already attempted.
-310 System error; Not implemented. {name}
Internal error. This functionality is not implemented.
-310 System error; Null pointer. {name}
Internal error. File system operation failed.
-310 System error; Path too long deleting cal
Resulting path to calibration file was too long and file was not
removed. Error caused by diagnostic command.
-310 System error; Receive pace not supported
Command is not supported for RS232 communication.
-310 System error; Revert to default cal not implemented
Command not implemented.
-310 System error; RS232 receive error. {name}
Caused by either framing, parity, or overrun errors during RS232
communication.
-310 System error; RS232 send error. {name}
Caused by either framing, parity, or overrun errors during RS232
communication.
-310 System error; RTS pace not supported
The RS232 command is not supported.
-310 System error; The sweep learn buffer overflowed. The sweep will not
play correctly.
Report this error to Agilent Technologies.
-310 System error; The system was powered off during file system update.
Page 8