Installation guide

Chapter 2 3
2 Getting Started
Checking the Shipment
1. Inspect the shipping container for damage.
Signs of damage may include a dented or torn shipping container or cushioning material that
shows signs of unusual stress or compacting.
2. Carefully remove the contents from the shipping container and verify that your order is complete.
The following items are shipped standard with each instrument:
• installation guide
• documentation CD- ROM
CD- ROM contents are also available in hard copy format. Refer to
“E8257D/67D and E8663D PSG Documentation” on page 9 for more information.
• three- prong ac power cord specific to geographic location
3. Verify that any options ordered are included with the shipment by checking the packing literature
included with the shipment.
NOTE The serial number label on the signal generator only lists the hardware/firmware options.
The packing literature verifies all items shipped.
Front handles and rack mounting hardware are also available for your signal generator. Refer to
“Front Handle and Rack Mount Flange Kits” on page 9 for more information.
4. Adapters shipped by Option are shown in the following table.
Table 2-1 Adapters Shipped by Option
Option Description Quantity Part Number
520 Connector Assembly, 3.5mm (female–female) 1 5061–5311
520 1ED Adapter, 3.5mm (female) to Type N (male) 1 1250–1744
532
540
544
550
Adapter, 2.4mm (female)–2.92mm (female–K) 1 1250–2187
Adapter, 2.4mm (female–female) 1 33311–82005 or
1250- 2188
567 Adapter, 1.85mm (female–female) 1 85058–60114