Installation guide

Chapter 4 25
4 Regulatory Information
Statement of Compliance
This product has been designed and tested in accordance with IEC Publication 61010, Safety
Requirements for Electronic Measuring Apparatus, and has been supplied in a safe condition. The
instruction documentation contains information and warnings which must be followed by the user to
ensure safe operation and to maintain the product in a safe condition.
Assistance
Product maintenance agreements and other customer assistance agreements are available for Agilent
Technologies products. For any assistance, contact Agilent Technologies. (Refer to “Contacting Agilent
Sales and Service Offices” on page 11.)
Certification
Agilent Technologies certifies that this product met its published specifications at the time of
shipment from the factory. Agilent Technologies further certifies that its calibration measurements
are traceable to the United States National Institute of Standards and Technology, to the extent
allowed by the Institute’s calibration facility, and to the calibration facilities of other International
Standards Organization members.
Compliance with German Noise Requirements
This is to declare that this instrument is in conformance with the German Regulation on Noise
Declaration for Machines (Laermangabe nach der Maschinenlaermrerordnung - 3.GSGV Deutschland).
Compliance with Canadian EMC Requirements
This is to declare that this ISM device complies with Canadian ICES- 001. (Cet appareil ISM est
conforme a la norme NMB du Canada.)
Table 4-1 German Noise Requirements
Acoustic Noise Emission/Geraeuschemission
LpA < 70 dB LpA < 70 dB
Operator position am Arbeitsplatz
Normal position normaler Betrieb
per ISO 7779 nach DIN 45635 t.19