Installation guide

10 Chapter 2
Getting Started Preliminary
Proper Usage and Cleaning Preliminary
Proper Usage and Cleaning
The signal generator cover protects against physical contact with internal assemblies that contain
hazardous voltages, but does not protect against the entrance of water. To avoid damage and personal
injury, ensure that liquid substances are positioned away from your signal generator.
WARNING Personal injury may result if the signal generator is not used as specified.
Unspecified use impairs the protection provided by the equipment. The signal
generator must be used with all means for protection intact.
Cleaning Suggestions
To ensure good connections, the connectors on the front and rear panels of the signal generator need
to be cleaned regularly.
To prevent dust build- up that could potentially obstruct ventilation, clean the signal generator cover
periodically. Use a dry cloth, or one slightly dampened with water, to clean the external case parts.
WARNING To prevent electrical shock, disconnect the Agilent PSG E8257D/67D and E8663D
Signal Generator from mains before cleaning. Use a dry cloth or one slightly
dampened with water to clean the external case parts. Do not attempt to clean
internally.
User’s Guide
• description of features and functions
• signal generator operation tutorials
• optimization procedures
• concept information
• basic troubleshooting
E8251- 90353
Key Reference
• softkey and hardkey descriptions
E8251- 90354
Programming Guide
• remote operation procedures
• programming examples
• downloading and using files
E8251- 90355
SCPI Command Reference
• SCPI command descriptions
• command compatibility tables
E8251- 90356
Service Guide
(Option OBW)
• troubleshooting procedures
• assembly replacement procedures
• parts information
E8251- 90359
Table 2-3 Available E8257D/67D and E8663D PSG Documentation
Document Type Description Part Number