User`s guide

2.0 Demonstration with a
PC connected directly
to a test set via a LAN
crossover cable
2.1 Required equipment
The following equipment is needed
for this demonstration:
Agilent E5515B Opt. 002,
E5515C Opt. 002, or
E5515TU Opt. 002 (upgraded)
If the unit is an E5515B,
check the serial number for
compatibility:
A serial number beginning
with a US prefix must be
US40410511.
A serial number beginning
with a GB prefix must be
GB40410348.
If you have a lower serial
number, contact Agilent for
E5515B upgrade information.
E6701A GPRS lab application
test set internal software,
Rev. A.01.10 or higher
E1960A GSM test application
(optional)
test set internal software is
useful when testing wireless
devices with both GSM and
GPRS capabilities
procedures using the E1960A
test application are NOT
included in this demonstration
guide
GPRS phone or other wireless
appliance
Motorola Timeport
260 Series
GPRS Mobile Phone with RF
cable, battery, and battery
charger (for standard Agilent
demonstrations)
Subscriber Identity Module (SIM)
Card
Agilent test MicroSIM preferred
(part number 08922-80048)
another test SIM may be
substituted
Windows
®
personal computer (PC)
PC hardware with an Ethernet
LAN port
Microsoft
®
Windows 98 or
Windows NT
®
, version 4.0
with Service Pack 5 or
higher
other operating systems
may work, but they are not
supported
• Microsoft Internet Explorer
®
(version 5.0) Web browser:
other browsers may work
and must support the
following features:
support for nested
frames
support for JavaScript
(version 1.2 or higher)
support for tables
• WAP gateway software
(for data connection and WAP
server demonstrations)
Infinite WAPLite gateway
from Captaris Inc. has been
tested by Agilent, but is not
endorsed or guaranteed by
Agilent. (See Appendix A:
Installing a WAP Gateway
into a PC for Internet
download instructions.)
• Crossover LAN cable
Agilent part number:
8121-0510, or Black Box
®
Part No. EVCRB05-0006;
Category-5 Crossover Cables,
1.8 meters, 4-pair, RJ-45
connectors
4