User`s guide

Watch the test set's display. At the
bottom, in the active cell window,
you can note the status will switch
between “PDP Active” and
“Transferring” as datagrams are
sent back and forth between the
phone and the WAPLite server on
the PC.
Note the three sections of the dis-
play. Downlink power will flash a
result each time the test set trans-
mits to the phone. Counters track
data packets and RACH’s. Error
Reports continuously indicate the
quality of the wireless appliance
links.
8. On the phone’s display, look at
the downloaded image and use
the scroll up/down key to read
the text.
9. If you get a web server error,
press the phone’s OK button to
go Back to see the image, and
quickly scroll to see the text.
(There appears to be a bug in
this version of the WAPLite data
download.)
10. Press the C key two or three
times to return to the Browser
Menu.
Note that the WAPLite image and
text is the only information accessi-
ble by a WAP browser that is stored
in the Infinite WAPLite Gateway at
installation. On the PC, note that the
Infinite WAPLite window shows one
active user, and lists some requests
processed.
3.6.2 Accessing a simple local file on
the WAPLite gateway with the
phone
1. On the test set, press the Call
Setup key. The Motorola
Timeport phone should be on
and attached to the test set. The
phone’s display should show the
Browser Menu.If the phone’s
Browser Menu is not displayed,
press the phone’s Menu key
briefly.
2. When the phone's display shows
“Access Internet / Select?”,
press the OK key to select.
3. Now hold down the Menu key
for about three seconds and
release.
4. On the Browser Menu, scroll to
2>Web Favorites with the
up/down arrow key.
5. Press OK.
6. Scroll to
http://local/waplite.wml.
7. Press OK key to Go. (The phone
requests data from the device at
the address above).
32