User`s guide

3.4.5 Looking at message details
The following steps allow you to
look at just the message details.
1. Open the folder Good
Stuff1_files.
2. Double click to open the
logpage_files sub-folder
3. Double click on the logdtl.htm
file. Internet Explorer will start
and display a web page that
contains the detailed messages.
4. Close this Internet Explorer
window and go back to
Windows Explorer.
3.4.4 Viewing the saved data
1. Open Windows Explorer (the
file manager program).
2. Find the E6701A Demo Logs
folder you created, and double-
click it. You should find that a
sub-folder was created using the
file name you used, with the
following contents: a file folder
named “Good Stuff1_files”, and
a file named “Good Stuff1.htm”.
3. To look at all your log data,
double-click on the file Good
Stuff1.htm. Internet Explorer
will start, and display a web
page. You can scroll through
this data and use the hyperlinks
just like on the original web
page.
4. Close this Internet Explorer
window and go back to
Windows Explorer.
28
3.4.6 Looking at the message summary
The following steps allow you to
look at just the message summary.
1. Double click on the logsum.htm
file. Internet Explorer will start,
and display a web page that
contains the summary
messages. (It is also located in
the folder Good Stuff1_files, in
the logpage_files sub-folder).
2. Close this Internet Explorer
window.
3.4.7 Log capture using front-panel
keys
Note that you can also capture a log
using the front-panel keys of the test
set, and retrieve it later with the
PC’s browser.
1. On the PC, go back to the active
Internet Explorer browser with
the 8960 Web control page.
2. Turn off the phone.
3. On the test set, on the Call
Setup screen, on the left
Control column of softkeys,
press the More key until you
see “2 of 2”.
4. Choose Protocol Logging
(F1 key).
5. Choose from the selections to
Start, Stop, and Modify the
setup. Note that these keys are
identical to the PC browser
logging functions.
6. Select the GMM/SM and
GSM_L3 observation points
again.
7. Watch the PC display after you
press the test set's Start
Logging softkey (F1).
8. Turn the phone on. The PC dis -
play will update as new data is
captured in the test set. Also, at
the beginning of each log, the
log started time will change.
9. On the test set, press the Stop
Logging softkey (F1). Wait a few
moments. The PC display will
update as new data is captured
in the test set.