User`s guide

Table of contents
1.0 Introduction 3
2.0 Demonstration with a PC connected directly to a test set via a LAN crossover cable 4
2.1 Required equipment 4
2.2 Setup 5
2.2.1 Equipment configuration 5
2.2.2 Test set adjustments 6
2.2.3 PC settings 8
2.2.4 Verify PC settings 9
2.2.5 Verify GPRS attach function 10
2.2.6 Modifying phone settings 10
2.3 Product feature: Screen image capture 12
2.4 Product feature: Protocol logging 12
2.4.1 Using protocol logging 12
2.4.2 Buffer operation 12
2.4.3 Examining log data on the PC 13
2.4.4 Saving log data in the PC 13
2.4.5 Viewing saved data 13
2.4.6 Looking at message details 13
2.4.7 Looking at the message summary 13
2.4.8 Log capture using panel keys 13
2.5 Product feature: Ping 14
2.5.1 Protocol logging while pinging 14
2.5.2 Pinging an alternative device 14
2.5.3 Pinging the DUT 14
2.6 Product feature: Data channel 15
2.6.1 Running gateway software 15
2.6.2 Browsing the gateway 15
2.6.3 Logging datagrams while browsing 16
2.6.4 Disconnecting the gateway 16
2.7 Product feature: Additional connection parameters 16
2.7.1 Changing the broadcast channel configuration 16
2.7.2 Timing advance 16
2.7.3 User-settable uplink flag 16
3.0 Demonstration with a PC connected to a test set via a LAN 17
3.1 Required equipment 17
3.2 Setup 18
3.2.1 Required addresses 18
3.2.2 Equipment configuration 19
3.2.3 Test set adjustments 20
3.2.4 PC settings 21
3.2.5 Verify the PC IP Address 23
3.2.6 Verify PC settings 24
3.2.7 Verify GPRS attach function 24
3.2.8 Modify phone settings to demonstrate data connection functions 25
3.3 Product feature: Screen image capture 26
3.4 Product feature: Protocol logging 26
3.4.1 Buffer operation 27
3.4.2 Examining the log data on the PC 27
3.4.3 Saving the log data 27
3.4.4 Viewing the saved data 28
3.4.5 Looking at message details 28
3.4.6 Looking at the message summary 28
3.4.7 Log capture using front-panel keys 28
3.5 Product feature: Ping 29
3.5.1 Pinging the alternate device 29
3.5.2 Pinging the DUT 30
3.6 Product feature: Data channel 31
3.6.1 Running the Infinite WAPLite proxy gateway software on a PC 31
3.6.2 Accessing a simple local file on the WAPLite gateway with the phone 32
3.6.3 Browsing “real” Web sites via the WAPLite gateway with the phone 33
3.6.4 Logging IP datagrams while accessing a Web site with the phone 33
3.6.5 Disabling WAPLite software 33
3.7 Product feature: Additional connection parameters 34
3.7.1 Changing the broadcast channel configuration 34
3.7.2 Timing advance 34
3.7.3 User-settable uplink flag 34
Appendix A: Installing a WAP gateway into a PC 35
Appendix B: Troubleshooting 36
Appendix C: Glossary 39
2