User`s guide

3.2.2 Equipment configuration
To perform this demonstration,
equipment cables should be connect-
ed as shown in Figure 2. On the test
set, if a LAN jumper cable is con-
nected on the rear panel, disconnect
it.
19
DUT
RF Test
Port
Device Under Test
(with Test SIM card installed)
RF IN/OUT
(Front Panel)
LAN PORT
(Rear panel)
Personal computer
(with Internet Explorer
web browser and WAP
gateway software installed)
LAN Cable
LAN Cable
LAN
Port
RF Test Cable
E5515B/C
Test Set with
E6701A LA
LAN
Figure 2. PC Connected to a test set via a LAN