User`s guide

Page 10 of 30 Rev. 1.0; Feb. 19, 2002

IMPORTANT: The DUT IP Address and the Test Set ‘s LAN IP Address cannot be the

same. Also, do not set the 4

set of numbers to 0; and do not set the 4

set of numbers

greater than 254.

7. Press the knob to set the address.

8. Write down the address you entered:

DUT IP ADDRESS _____________________________________________

Note that the entered DUT IP address must be on the same subnet as the Test Set.

9. Press the Close Menu (F6) key.

PC Setup

Turn on the PC. If already on, close any running applications. If necessary, enter your

Windows password to begin using the PC. Use the instructions appropriate for your

operating system (Windows 98 or Windows 2000) below.

Windows 98

This procedure assumes you are using a standalone PC (not connected to a network) using

the Microsoft Windows 98 operating system. Other PC configurations may use slightly

different setups.

1. Open the Control Panel

2. Choose the Internet Options icon

a. Select the Connections tab

b. Select the LAN Settings box

c. In the “Automatic configuration” section, both “Automatically detect settings”

and “Use automatic configuration script” must NOT be checked.

d. In the “Proxy server” section, “Use a proxy server” must NOT be checked.

Select OK, then OK again to exit the Internet Options menu

3. Choose the Network icon

a. Select the Configuration tab