User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
87
This setting overwrites the value defined in the currently loaded scenario file, when the
BSE emulator is not running (Mode > BSE > Emulator Mode- Stop is selected).
Mode
BSE
Overwrites Scenario File Value
Yes
Range FDD: 1.4 MHz, 3.0 MHz, 5 MHz, 10 MHz, 15 MHz, 20 MHz
TDD: 5 MHz, 10 MHz, 20 MHz
Preset
10 MHz
Initial S/W Revision 6.0 (1.4 MHz, 3.0 MHz, and 15 MHz were added for FDD only at S/W
Revision 6.4.)
Key Path
Mode > BSE > Mode Setup
C-RNTI
(Cell Radio Network Temporary Identity)
Enables you to set the C-RNTI assigned to the UE during connection setup.
Mode
BSE
Range
10 to 65522
Preset
12
State Saved
No
Initial S/W Revision
6.0
Key Path
Mode > BSE > Mode Setup
Mode Setup (BSE Mode)-Key Menu 2
Accesses the available parameters you can set to configure the BSE mode.
PHY Settings
MAC Settings
RRC Settings – Key Menu 1
NAS Settings
Security
You must press the More front-panel key to access this key menu.
Key Path: Front-panel key