User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
84
Start Time
Specifies the time you wish the measurement interval to start.
Mode
SA, LTE
Preset
5000 us
Initial S/W Revision
6.3
Key Path
Mode > SA/LTE > Meas Setup > Edit Interval
Duration
Specifies the interval of time for which you wish to make the measurement.
Mode
SA, LTE
Preset
1000 us
Initial S/W Revision
6.3
Key Path
Mode > SA/LTE > Meas Setup > Edit Interval
Measurement BW
Specifies the resolution bandwidth for which you wish to make the measurement.
Mode
SA, LTE
Preset
10.000 MHz
Initial S/W Revision
6.3
Key Path
Mode > SA/LTE > Meas Setup > Edit Interval
Display Interval
Specifies the frequency interval or index number for which you wish to display.
Mode
SA, LTE
Preset
0
Initial S/W Revision
6.3
Key Path
Mode > SA/LTE > Meas Setup
Integ. BW
Specifies the integration bandwidth used to calculate the power in the reference channel.
Key Path: Mode > BSE or SA > Meas Setup
Mode
There are two modes in the PXT: Signal Analyzer (SA) and Base Station Emulator (BSE).
Refer to SA
for more information.
Refer to BSE
for more information.
Key Path: Front-panel key