User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
74
Tx Power Displays the estimated power being transmitted by the UE and is based on the value
of pMax and the Power Headroom Index sent by the UE.
Key Path: Mode > BSE > Meas
BLER/Throughput
BLER(%) BLER: Displays the block error rate in percent versus time in seconds.
The UL throughout measurements are currently FDD only.
Mbps Throughput: Displays the megabits per second of data throughput versus time in seconds as measured at the
top of the PHY layer..
IP Throughput Result:
DL BLER/Throughput
[UL Feedback Information]
Displays the feedback sent on the Uplink by the UE regarding the DL transmission.