User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
67
Func Setup
(Functional Setup) Accesses trigger menu options.
Refer to RF Measurements
section for more information on the menus below.
Key Path: Front-panel key
Trigger
Accesses Free Run and External Trigger menu options.
Refer to RF Measurements
section for more information on the menus below.
Key Path: Mode > BSE > Func Setup
Free Run
Pressing this key, when it is not selected, selects free-run triggering. Free run triggering occurs
immediately after the sweep/measurement is initiated.
Key Path: Mode > BSE > Func Setup > Trigger
External Trigger
Refer to Triggering on page 192 for descriptions of the following functions: Trigger Slope, Trigger Delay,
Internal Trigger, Trigger Slope, Trigger Delay, and Trigger Output.
Key Path: Mode > BSE > Func Setup > Trigger
Trigger Output
Accesses menu keys that enable you to setup the trigger parameters associated with the relative power
control test cases for an RCT test system.
Trigger Parameters:
• Output Type (Frame/Event) When set = Event
, keys below are available
• Event Trigger Slope (Pos/Neg)
• Event Trigger Delay (On/Off)
Mode
BSE
Dependencies and/or Couplings
This key is grayed out unless:
• Mode > SA > LTE = Power vs. Time
• BSE > Func > UE Power Control > Frame Configuration > RB
Alloc. sf control = On
Initial S/W Revision
6.4
Key Path
Mode > BSE > Func Setup