User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
61
Initial S/W Revision
6.4
Key Path
Mode > BSE > Func > More > RCT > Statistical Throughput
Test Start
Starts the statistical throughput measurement.
Mode
BSE, FDD
Initial S/W Revision
6.4
Key Path
Mode > BSE > Func > More > RCT > Statistical Throughput
Test Stop
Stops the statistical throughput measurement.
Mode
BSE, FDD
Dependencies/Couplings
This key is greyed out unless test is running.
Initial S/W Revision
6.4
Key Path
Mode > BSE > Func > More > RCT > Statistical Throughput
Pm-an
(Probability of Misdetection of Ack/Nack)
The Pm-an measurement is used as part of an RCT system to perform test cases in 36.521-1, section 8.5.1.
As described in this specification, these test cases require generation of a sequence of DCI 0 messages
and PHICH transmissions in a specific pattern. This pattern, together with a measurement that determines
whether the UE is transmitting in certain subframes (these transmissions counting as NACKs) are covered
by this measurement.
Mode
BSE, FDD
Initial S/W Revision
6.3
Key Path
Mode > BSE > Func > More > RCT
Max Frame Size
This setting determines the maximum number of opportunities for the UE to transmit or not transmit (this
being counted as a NACK or ACK respectively) when Test Start is selected.
If Confidence Level is set to On, the test may stop before reaching the maximum
number of frames.
Mode
BSE, FDD
Range
1 to 10000000
Preset
130752
Initial S/W Revision
6.3
Key Path
Mode > BSE > Func > More > RCT > PM-an