User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
51
Handover
Accesses the Send and Message Name functions.
Mode
BSE. FDD
Dependencies and/or Couplings
You must have a scenario file that includes handover messages.
Initial S/W Revision
6.1
Notes
SCPI command returns number of HANDOVER messages available.
Key Path
Mode > BSE > Func
Send
Sends the specified Handover message from the list displayed when you press Func > Handover >
Message Name.
Mode
BSE, FDD
Initial S/W Revision
6.1
Key Path
Mode > BSE > Func > Handover
Message Name
Enables you to select the message you wish to send from the list of Paging messages you defined in the
currently loaded scenario file.
Messages shown here are those you created in the N6062A Message Editor
software on the “Extended” tab.
Mode
BSE, FDD
Initial S/W Revision
6.1
Notes
SCPI command returns the name of the specified HANDOVER message.
Key Path
Mode > BSE > Func > Handover
Start HO to eHRPD
In conjunction with an 8960 running E6706F Lab Application or later, this menu key initiates an optimized
handover to eHRPD. The PXT and 8960 must be EPC connected as described in the EPC
Setup section on
85
.
Mode
BSE, FDD
Initial S/W Revision
6.3
Key Path
Mode > BSE > Func > Handover