User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
34
Setting Method
Enables you to select how you wish to set the Frequency.
EARFCN: When you select this option, the PXT frequency is determined by the values set using the Band
menu key and those values entered for the EARFCN parameters. Refer to DL EARFCN, UL EARFCN, and
UL/DL EARFCN for further clarification.
FREQ: Sets the PXT frequency based on the values set using the and Center (UL) Freq
menu keys when
Tech is set to FDD. The Center (UL/DL) Freq
menu key is used to set the frequency when Tech is set to
TDD.
When changing Setting Method from FREQ to EARFCN, the frequency used by the
PXT may change, depending upon the current settings of the EARFCN menu keys.
Mode
BSE
Range
EARFCN | FREQ
Preset
EARFCN
Initial S/W Revision
6.3
Key Path
Freq
Center (DL) Freq
Sets the DL center frequency to a value that is different from the UL.
Mode
BSE, SA, FDD
Range
350 MHz to 3 GHz or 6 GHz (Depends upon license.)
Units
Hz, kHz, MHz, GHz
Preset FDD: 2.140 GHz
TDD: None (grayed out)
Dependencies and/or Couplings Frequency range depends on installed license.
This key is grayed out when Tech is set to TDD.
Initial S/W Revision
6.0
License Type E6621A-503 = 350 MHz to 3 GHz
E6621A-506 = 350 MHz to 6 GHz
Key Path
Freq
Center (UL) Freq
Sets the UL center frequency to a value that is different from the DL.
Mode
BSE, SA, FDD
Range
350 MHz to 3 GHz or 6 GHz (Depends upon license.)
Units
Hz, KHz, MHz, GHz
Preset FDD: 1.950 GHz
TDD: None (grayed out)
Dependencies and/or Couplings This key is grayed out when Tech is set to TDD.
Frequency range depends on installed license.