User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
26
Mode
BSE
Initial S/W Revision
6.3
Key Path
Mode > BSE > Config
SIB8 Force Sync
Pressing this key enables the following:
1. Resets the value of synchronousSystemTime inside the SIB8 message to the value specified in the
scenario file.
2. Sends an external trigger signal at the beginning of the subframe to transmit this same SIB8 message
containing the reset value.
If you include an SIB8 message in the scenario file, the following occurs:
• The synchronousSystemTime parameter increments by one with each
transmission of SIB8.
• The first transmission of SIB8 sends a trigger at the beginning of the
subframe. This trigger signal replaces the frame trigger.
• Frame triggering is disabled.
Mode
BSE
Initial S/W Revision
6.3
Key Path
Mode > BSE > Config > External Sync
Security Sync
This function is used to force the security context of one PXT to be sent to another one. You should not
normally need to use this because during a handover or re-selection, the context is transferred
automatically.
Mode
BSE
Instrument S/W Revision
6.4
Key Path
Mode > BSE/SA > Config > External Sync