User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
22
IP
Sets the PXT IP address.
The IP address is persistent through a power cycle of the PXT.
IP address of the PXT is needed to connect to the N6061A Protocol Logging and
Analysis tool, the N6062A Protocol Message Editor tool, and the E6621A Remote
API DLL.
Key Path: Config > Network Setup > IP Setup
Netmask
This value is a 32-bit mask used to divide an IP address into subnets and specify the networks available
hosts.
The netmask IP address is needed to connect to the N6061A Protocol Logging
and Analysis tool, the N6062A Protocol Message Editor tool, and the E6621A
Remote API DLL.
This setting is persistent through an instrument power cycle.
Key Path: Config > Network Setup > IP Setup
Gateway
This IP address is that address for the computer or network that enables or controls access to the other
computers or a network you are accessing. When you are doing end-to-end data, this is the address to
which uplink data will be sent. It could be an application server or a router on your network.
The gateway IP address is needed to connect to the N6061A Protocol Logging
and Analysis tool, the N6062A Protocol Message Editor tool, and the E6621A
Remote API DLL.
This setting is persistent through an instrument power cycle.
Key Path: Config > Network Setup > IP Setup
DNS
Directory Name Service (DNS)
Set this if you have a DNS on your network.
This setting is persistent through an instrument power cycle.
Key Path: Config > Network Setup > IP Setup