User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
239
Message Editor Field
PXT Menu Key
Key Path
DNS State controls whether a DNS address
will be assigned to the UE in the Activate
Default EPS Bearer Context Request
message.
DNS State
BSE > Mode Setup> More > NAS
Settings > Default EPS Bearer
Config #(1-4)
DNS Address Type controls what type of IP
address (IPv4, IPv6 or IPv4v6) is assigned
as a DNS address in the Activate Default
EPS Bearer Context Request message.
DNS Address Type
BSE > Mode Setup> More > NAS
Settings > Default EPS Bearer
Config #(1-4)
V4 DNS Address controls the IPv4 address
that is assigned as a DNS address in the
Activate Default EPS Bearer Context
Request message, if the DNS Address Type
selection and DNS State have enabled this.
V4 DNS Address
BSE > Mode Setup> More > NAS
Settings > Default EPS Bearer
Config #(1-4)
APN selects the value of the APN that is
assigned to the UE in the Activate Default
EPS Bearer Context Request. Based on the
APN Overwrite menu key, it is also used to
overwrite the APN in the Communication
Scenario. For more information, see the
section entitled, “Access Point Name” in
Chapter 7 of the N6062A Message Editor
User’s Guide.
APN
BSE > Mode Setup> More > NAS
Settings > Default EPS Bearer
Config #(1-4)
APN Overwrite controls whether the APN
is overwritten only in the Default EPS
Bearer Context Request message, or
whether the value also overwrites the APN
in the Communication Scenario. For more
information, see the section entitled,
“Access Point Name” in Chapter 7 of the
N6062A Message Editor User’s Guide.
APN Overwrite
BSE > Mode Setup> More > NAS
Settings > More
P-CSCF State controls whether the IP
address of a Proxy-Call Session Control
Function server is supplied to the UE in the
Activate Default EPS Bearer Context
Request message.
P-CSCF State
BSE > Mode Setup> More > NAS
Settings > Default EPS Bearer
Config #(1-4) > More
P-CSCF Address Type controls what type
of IP address (IPv4, IPv6 or IPv4v6) is
assigned as the IP address of the P-CSCF
server.
P-CSCF Address
Type
BSE > Mode Setup> More > NAS
Settings > Default EPS Bearer
Config #(1-4) > More
V4 P-CSCF Address controls the IPv4
address that is assigned as the IP address
of the P-CSCF server – assuming the P-
CSCF State has enabled this.
V4 P-CSCF Address
BSE > Mode Setup> More > NAS
Settings > Default EPS Bearer
Config #(1-4) > More