User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
236
Message Editor Field
PXT Menu Key
Key Path
p0-NominalPUSCH contributes towards the
power of the PUSCH and is carried in SIB2.
p0-NominalPUSCH
BSE > Mode Setup> More > RRC
Settings
p0-UE-PUSCH contributes towards PUSCH
power and is carried in the (RRC
Connection) Setup message.
p0-UE-PUSCH
BSE > Mode Setup> More > RRC
Settings
defaultPagingCycle controls how
frequently the UE can be paged and is
contained in SIB2.
Default Paging Cycle
BSE > Mode Setup> More > RRC
Settings
nB controls how frequently the UE can be
paged and is contained in SIB2.
NB
BSE > Mode Setup> More > RRC
Settings
additionalSpectrumEmission controls how
much leakage the UE is allowed into
adjacent frequencies and is contained in
SIB2.
Additional Spectrum
Emission
BSE > Mode Setup> More > RRC
Settings
PDNAddressInformation is the IP Address
assigned to the UE in the Activate Default
EPS Bearer Context Request message.
Since this is #1, it is the IP address that is
contained inside the (Non-Access Stratum)
NAS Attach Accept message.
DUT IP Address #1
BSE > Mode Setup> More > RRC
Settings
drx-Config determines if the DRX Config IE
in the RRC Connection Reconfiguration
message is set to setup or release.
Connected DRX
On/Off
BSE > Mode Setup> More > RRC
Settings > More
longDRX-Cycle is related to Connected
Mode DRX and is present in the RRC
Connection Reconfiguration message.
longDRX-Cycle
BSE > Mode Setup> More > RRC
Settings > More
longDRX-CycleStartOffset is related to
Connected Mode DRX and is present in the
RRC Connection Reconfiguration message.
DRX-
CycleStartOffset
BSE > Mode Setup> More > RRC
Settings > More
onDurationTimer is related to Connected
Mode DRX and is present in the RRC
Connection Reconfiguration message.
onDurationTimer
BSE > Mode Setup> More > RRC
Settings > More
drx-InactivityTimer is related to Connected
Mode DRX and is present in the RRC
Connection Reconfiguration message.
drx-InactivityTimer
BSE > Mode Setup> More > RRC
Settings > More
shortDRX is related to Connected Mode
DRX and is present in the RRC Connection
Reconfiguration message. This field
controls whether shortDRX IE is present or
not.
Short DRX Cycle
On/Off
BSE > Mode Setup> More > RRC
Settings > More