User`s guide

i
Notices
© Agilent Technologies, Inc. 2010-2013
No part of this manual may be reproduced in
any form or by any means (including electronic
storage and retrieval or translation into a
foreign language) without prior agreement and
written consent from Agilent Technologies, Inc.
as governed by United States and international
copyright laws.
Trademark Notices
Windows
®
, MS Windows XP
®
, and MS
Windows 7
®
are either registered trademarks
of Microsoft Corporation in the United States
and/or other countries.
Pentium® is a trademark of Intel Corporation
in the U.S. and other countries.
Java™ is a U.S. trademark of Sun
Microsystems, Inc.
Warranty
The material contained in this document is
provided “as is,” and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted by
applicable law, Agilent disclaims all
warranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited to
the implied warranties of merchantability
and fitness for a particular purpose. Agilent
shall not be liable for errors or for incidental
or consequential damages in connection with
the furnishing, use, or performance of this
document or of any information contained
herein. Should Agilent and the user have a
separate written agreement with warranty
terms covering the material in this document
that conflict with these terms, the warranty
terms in the separate agreement shall
control.
Statement of Compliance
This product has been designed and
tested in accordance with accepted
industry standards, and has been
supplied in a safe condition. The
documentation contains information
and warnings that must be followed
by the user to ensure safe operation
and to maintain the product in a safe
condition.
Manual Part Number
E6621-90002
Edition
May 2013
Documents Software Version 6.5
Technology Licenses
The hardware and/or software described in
this document are furnished under a license
and may be used or copied only in accordance
with the terms of such license.
Restricted Rights Legend
If software is for use in the performance of a
U.S. Government prime contract or
subcontract, Software is delivered and
licensed as “Commercial computer software”
as defined in DFAR 252.227-7014 (June 1995),
or as a “commercial item” as defined in FAR
2.101(a) or as “Restricted computer software”
as defined in FAR 52.227-19 (June 1987) or
any equivalent agency regulation or contract
clause. Use, duplication or disclosure of
Software is subject to Agilent Technologies’
standard commercial license terms, and non-
DOD Departments and Agencies of the U.S.
Government will receive no greater than
Restricted Rights as defined in FAR 52.227-
19(c)(1-2) (June 1987). U.S. Government users
will receive no greater than Limited Rights as
defined in FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Safety Notices
The following general safety
precautions must be observed during
all phases of operation of this
instrument. Failure to comply with
these precautions or with specific
warnings elsewhere in this manual
violates safety standards of design,
manufacture, and intended use of the
instrument. Agilent Technologies Inc.
assumes no liability for the
customer’s failure to comply with
these requirements.
A CAUTION notice denotes a hazard.
It calls attention to an operating
procedure, practice, or the like that,
if not correctly performed or
adhered to, could result in damage
to the product or loss of important
data. Do not proceed beyond a
CAUTION notice until the indicated
conditions are fully understood and
met.
A WARNING notice denotes a
hazard. It calls attention to an
operating procedure, practice, or
the like that, if not correctly
performed or adhered to, could
result in personal injury or death.
Do not proceed beyond a WARNING
notice until the indicated conditions
are fully understood and met.
Electrical Rating
100-240 VAC, 50/60 Hz, 590 W max.
This instrument has an auto-ranging
line voltage input, ensure the supply
voltage is within the specified range.
CAUTION
WARNING