User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
8
RF1 Amplitude (RSTP)
The value displayed on this menu key is read-only and is the RF1 amplitude expressed as an RSTP power
level determined by the following equation:
RSTP = Cell Power – 10 log
10
(number of subcarriers in the bandwidth)
Mode
BSE. SA
Range
−150.79 dBm (for 20MHz Channel Bandwidth) to −14.77 dBm (for 5MHz)
Preset
− 84.78 dBm
State Saved
Yes
Dependencies and/or Couplings Read-only key dependent upon cell power and number of subcarriers in
the bandwidth.
Initial S/W Revision
6.3
Key Path
Amp
RF2 Amplitude (RSTP)
The value displayed on this menu key is read-only and is the RF2 amplitude expressed as an RSTP power
level determined by the following equation:
RSTP = Cell Power – 10 log
10
(number of sub-carriers in the bandwidth)
Mode
BSE. SA
Range
−150.79 dBm (for 20MHz Channel Bandwidth) to −14.77 dBm (for 5MHz)
Preset
−84 78 dBm
State Saved
Yes
Dependencies and/or Couplings Read-only key dependent upon cell power and number of subcarriers in
the bandwidth.
Initial S/W Revision
6.3
Key Path
Amp