User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
159
For example: you may wish to measure a different slot or multiple slots. Below is an example of uplink
PUSCH data from the PXT analyzed to measure 20 slots:
Figure 4 – 3: UL PUSCH Data Measuring 20 Slots
You can change any parameter on the PXT to obtain the data you wish to analyze on the VSA. Just
remember to use the VSA as you would normally, to properly view and analyze the data.
You can also run the PXT to make other types of measurements or tests such as FTP, Handovers, and LTE
RF measurements. The data from these activities can then be analyzed using the VSA.