User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
142
3 Using the Base Station Emulator Mode (BSE)
In the Base Station Emulator (eNodeB emulation) mode, the PXT simulates an LTE eNodeB's operation for
use in the development and test of LTE UEs. In this mode, you test the UE by setting up a call and
establishing a link. When the link is established the uplink and downlink tests described below can be
performed.
The following topics are included in this section:
• Display and Menu Descriptions on page 142
• Setup and Operation on page 144
Display and Menu Descriptions
The section describes the Emulator and Configuration displays, menus, and keys that are available in the
BSE mode. These menus and displays are accessed by selecting the BSE front-panel key.
When discussing key paths within tables or text, front-panel keys are represented in
bold; menu keys appear in bold, italics.
Emulator Mode Menu and Display
The areas labeled in the figure below are described in this section.
Figure 3-1: Emulator Mode