User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
138
Disconnect:
Disconnects the VSA software.
Mode
SA
Initial S/W Revision
6.4
Key Path
Mode > SA > Agilent VSA > Real Time VSA
VSA IP address:
Insert the IP address of the PC hosting the Agilent VSA software.
This must match the IP address of the PC running the VSA application.
Mode
SA
Range
0.0.0.0 to 255.255.255.255 (must be the VSA PC valid IPv4 address)
Initial S/W Revision
6.4
Key Path
Mode > SA > Agilent VSA > Real Time VSA
VSA Port:
This value is always set to1234 and is currently not a parameter that should be changed.
Mode
SA
Range
1234 (Do not change this value.)
Initial S/W Revision
6.4
Key Path
Mode > SA > Agilent VSA > Real Time VSA
Start sending data:
Begins sending uplink data to the VSA.
Mode
SA
Initial S/W Revision
6.4
Key Path
Mode > SA > Agilent VSA > Real Time VSA
Stop sending data:
Ends sending uplink data to the VSA.
Mode
SA
Initial S/W Revision
6.4
Key Path
Mode > SA > Agilent VSA > Real Time VSA