User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
137
Start:
Starts the recording.
Stop:
Stops or aborts the recording. It is recommended that you start the recording and allow the PXT to
automatically stop the recording, based on the recording length you specified using the Agilent VSA >
Record VSA > Length setting.
Length:
Sets the duration in msec.
Saving recordings of captured data takes approximately 1 second per ms of
recorded file.
Mode
SA
Range
12 – 200 ms
Preset
12 ms
Initial S/W Revision
6.4
Key Path
Mode > SA > Agilent VSA > Record VSA
Save:
Saves the recording on a file in this location:
D:\Program Files\Agilent\E6621A\CaptureData.
Real Time VSA
Enables you to send live data from the uplink signal to the PC hosting the VSA software application using
the PXT/VSA Communicator application software. The full feature set of the VSA software is available to
you for data analysis.
Refer to the section in this manual entitled, Controlling PXT in Live Mode on page 156
for detailed
information on this feature.
The capture time is set by default to 22 msec and cannot be changed.
Mode
SA
Initial S/W Revision
6.4
Key Path
Mode > SA > Agilent VSA
Connect:
Connects the VSA software.
Mode
SA
Initial S/W Revision
6.4
Key Path
Mode > SA > Agilent VSA > Real Time VSA