User`s guide
Agilent PXT Wireless Communications Test Set
User’s Guide
136
SA
Signal Analyzer (SA) mode enables two sub-modes: Spectrum Analyzer and LTE. Refer to the RF
Measurements chapter on page 175
.
Key Path: Front-panel key
Spectrum Analyzer
Refer to the RF Measurements chapter on page 175.
Key Path: Front-panel key
LTE
Refer to the RF Measurements chapter on page 175.
Key Path: Front-panel key
Agilent VSA
Provides you with the ability to play and analyze both live data and post-captured data recordings from the
PXT using the full feature set of the Agilent 89600 VSA (VSA) software application.
Refer to the Chapter in this manual entitled, Using the Agilent 89600 VSA Software with the PXT on page
155
for more information on using this feature.
Record VSA
Enables you to record captured data from the uplink signal and save it to this location on the PXT hard
drive:
D:\Program Files\Agilent\E6621A\CaptureData.
Using the PXT/VSA Communicator application software automatically or manually with a USB memory
stick, transfer these post-captured data recordings from the PXT to the PC hosting the VSA software. The
full feature set of the VSA software is available for you to replay and analyze the data.
Refer to the section in this manual entitled, Controlling PXT in Record Mode on page 160
for detailed
information on this feature.
Mode
SA
Initial S/W Revision
6.4
Key Path
Mode > SA > Agilent VSA