User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
130
Attach Type Handling
In the Attach Request message, the UE can specify that it is attaching for ‘EPS only’ or that it is
performing a ‘combined EPS/IMSI Attach’. In the EPS Attach Result (a parameter contained in the Attach
Accept message that would be sent back to the UE) the UE would expect to see that it has been given the
Attach Result that it requested. If Auto
is selected, this takes place automatically. If Manual is selected,
the value specified in the scenario file is sent to the UE. The same process takes place when the UE is
sent a Detach Accept or Tracking Area Update Accept message.
Mode
BSE
Overwrites Scenario File Value
Yes
Range
Auto | Manual
Preset
Auto
Initial S/W Revision
6.4
Key Path
BSE > Mode Setup> More > NAS Settings > More
APN Overwrite
This key controls whether the APN is overwritten only in the Default EPS Bearer Context Request
message, or whether the value also overwrites the APN in the Communication Scenario. For further
clarification of this function, refer to the Communication Scenario section of Chapter 7 in the N6062A
Message Editor user’s guide.
Mode
BSE
Range
Msg|Message + Scenario
Preset
Msg
Initial S/W Revision
6.4
Key Path
BSE > Mode Setup> More > NAS Settings > More
Security – Key Menu 1
Accesses the menu of Security features available for configuration.
Security
Authentication Algorithm
Key Option
K value
OP value
OPc value
AMF value
IMSI value
Replay
Key Path: BSE > Mode Setup> More