User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
129
Default EPS Bearer Config #3
Accesses the same configuration menu keys described for Default EPS Bearer Config #1 - Key Menu
except this menu enables configuration of a third Default EPS Bearer. The EPS Bearer Identity of the
context is dependent on the content of the third Activate Default EPS Bearer Context Request message
present in the currently loaded scenario file.
Mode
BSE, FDD
Overwrites Scenario File Value All parameter values accessed via this menu key overwrite the values
in the scenario file.
Range You cannot change this value. This key only accesses lower level
configuration parameters.
Preset
EPS Bearer ID specified in the scenario file
Dependencies and/or Couplings You must have a scenario file loaded that includes three Activate
Default EPS Bearer Context Request messages, but not running in
order to access this key menu.
Initial S/W Revision
6.4
Key Path
BSE > Mode Setup> More > NAS Settings
Default EPS Bearer Config #4
Accesses the same configuration menu keys described for Default EPS Bearer Config #1 - Key Menu,
except this key enables configuration of a fourth default EPS Bearer. The EPS Bearer Identity of the
context is dependent on the content of the fourth Activate Default EPS Bearer Context Request message
present in the scenario.
Mode
BSE, FDD
Overwrites Scenario File Value All parameter values accessed via this menu key overwrite the values
in the scenario file.
Range You cannot change this value. This key only accesses lower level
configuration parameters.
Preset
EPS Bearer ID specified in the scenario file
Dependencies and/or Couplings You must have a scenario file loaded that defines four Activate
Default EPS Bearer Context Request messages, but not running in
order to access this key menu.
Initial S/W Revision
6.4
Key Path
BSE > Mode Setup> More > NAS Settings