User`s guide

Agilent PXT Wireless Communications Test Set
User’s Guide
126
APN
(Access Point Name)
The value in this field controls the APN that is present in the Activate Default EPS Bearer Context Request.
Depending on the value of the APN Overwrite menu key, it also overwrites the Access Point Name in the
scenario file. Refer to chapter 7, section, “Communication Scenario” in the N6062A Message Editor User’s
Guide for more information on APN.
Mode
BSE, FDD
Overwrites Scenario File Value
Yes
Preset
Agilent
Dependencies and/or Couplings You must have a scenario file loaded (but not running) that defines
the particular EPS Bearer ID value for which you wish to configure.
Initial S/W Revision
6.4
Key Path BSE > Mode Setup> More > NAS Settings > Default EPS Bearer
Config #(1-4)
Default EPS Bearer Config #1 Key Menu 2
Accesses the configuration key menu 2 displayed for default EPS bearer: #1 - # 4.
Mode
BSE, FDD
Overwrites Scenario File Value
Yes
Preset
EPS Bearer ID 5
Initial S/W Revision
6.4
Key Path
BSE > Mode Setup> More > NAS Settings > More
P-CSCF State
Controls whether the IP address of a Proxy-Call Session Control Function server is supplied to the UE in
the Activate Default EPS Bearer Context Request message.
Mode
BSE
Overwrites Scenario File Value
Yes
Range
On | Off
Preset
Off
Dependencies and/or Couplings You must have a scenario file loaded (but not running) that defines
the particular EPS Bearer ID value for which you wish to configure.
Initial S/W Revision
6.4
Key Path BSE > Mode Setup> More > NAS Settings > Default EPS Bearer
Config #1 (- #4) > More